We have been known for over 10 years as Mightywide.com serving the “to the trade” Sign Industry. We are also the worldwide distributor of the Billboarder Banner Framing System, which is the Absolute Best Banner Framing System which also happens to be the lowest priced, thinnest profile, and easiest banner Change-Outs. This is truly one case where you get the best Banner Framing System, for the lowest price.
The BILLBOARDER BANNER FRAMING SYSTEM turns any BOX TRUCK, TRAILER OR WALL into a BILLBOARD
We are Exclusive Wholesale-to-the-Trade-Only World Wide Distributors for the Billboarder Banner Framing System (U.S. Patent #8,096,070). It was invented by the president of our company, Jay Markoff and now it is on over 500 trucks (and walls) across the USA.
We are also Wide-Format Printers for those of our Dealers who need our 10.5‑foot Wide4Mat Printing Service.
Call us and Say Hi! It costs nothing to register as a dealer! (619) 644‑2332
BELOW is just one of the many beautiful letters we get from sign dealers across the USA. Below the letter are a few of the pictures he sent in. (Note: The pictures scroll from right to left automatically. You can also click the buttons to scroll to the picture you want.)
“Dear Jay Markoff,
I have been using the Bilboarder Banner Framing System for the past 5 years with great results. The system is fairly easy to install and easy to change banners. I have used the frames on buildings, trucks and monument signs. I have attached some photos of different trucks with the frames installed.”
Thanks, Peter Miranda
Graphic Specialists Group
5806 N Woodcreek Cir
Mckinney, TX 75071
We are pleased to announce that we are now Authorized Dealers for the Billboarder Banner Framing System.
Below are just a very few of the companies that have installed “The BILLBOARDER BANNER FRAMING SYSTEM” on their Trucks and Walls
BILLBOARDER BANNER FRAMING SYSTEM VS other FRAMING SYSTEMS
Super SLIM PROFILE
Its sleek design is only 3/8ths of an inch off the wall for minimal wind resistance and minimal increase in the truck’s width, as well as looking elegant on an office wall or the exterior of a Building, as well as Trucks.
Super SLIM PRICE
About one third the cost of other framing systems.
See our wholesale-only pricing above.
Much LESS MEASURING – IN FACT, NO MEASURING
Our patented automatic cutting groove makes cutting the banner to the right size “goof-proof.”
No other framing system has this patented, very important innovation!
Much FASTER INSTALLATION and CHANGE-OUTS than other FRAMING SYSTEMS
No army of nuts to tighten CALL FOR DETAILS (619)644-2332
BILLBOARDER BANNER FRAMING SYSTEM VS. GLUE-ON GRAPHICS
Much LESS COST AND TIME TO INSTALL than GLUE-ON GRAPHICS
THE BILLBOARDER BANNER FRAMING SYSTEM… can be installed by any Handyman. No Professional installer Needed No Special Tools required!
About 1 to 2 hours per side First Time ONLY, Less than half that time For just banner change-outs after “first time” initilal Base Plate Installation
With GLUE-ON GRAPHIC TRUCK ADS, a Professional Expensive Installer and Special Tools are Needed and he gets a lot more an hour than a Handyman. A Glue-On Graphics installation can take days and requires specialized tools and specific skills for installing GLUE-ON GRAPHIC TRUCK ADS.
Much LESS COST TO CHANGE-OUT ADS than GLUE-ON GRAPHICS
With the BILLBOARDER BANNER FRAMING SYSTEM you use inexpensive BANNERS. Depending on size aproximately 2 to 4 hundred dollars cost for the banner and a handyman for a couple of hours Vs.with GLUE-ON GRAPHIC TRUCK ADS, You basically have the same Expensive Glue-On Process to do all over again of tediously removing the old glued-on graphics and profesionaly instaling the new graphics pannel by panel. So another Big cost once again $2,400.00 to $4,000. This High cost to change out ads with Glue-On Graphics of course can inhibit one’s decision to change out their Truck Ads, even when a change is overdue!
Much EASIER TO REMOVE ADS than GLUE-ON GRAPHICS
With the BILLBOARDER BANNER FRAMING SYSTEM, Just unscrew the capping plates, pull the BANNER off, You’re Done! With GLUE-ON GRAPHIC TRUCK ADS, When it’s time to change the ad, you are left with a gluey mess to scrape off piece by piece “too much like removing wallpaper” it takes hours upon hours to totally remove a Glue-On Graphic.
An Installed BILLBOARDER BANNER FRAMING SYSTEM Increases the truck’s value!
Glue-On Graphics DECREASE the truck’s value.
The BILLBOARDER BANNER FRAMING SYSTEM IS SIMPLY FAR BETTER than Glue-On Graphics or any other Frames
Low 3/8 inch Profile, Lower Cost, EZ Installation and Change-outs,
Simple patented design now on trucks all over the USA!
Low cost even makes the decision to change your ads Easy!
Get this Demonstrator Sample FREE!
Become a Billboarder Banner Framing System Dealer and this Demonstrator Sample is yours FREE! Just pay the shipping ($15-25, most anywhere in the Continental USA), which will be refunded as a credit on your first order!
Call us at
and request one!
Dealers who have this sample sell more Billboarder Banner Framing Systems, and therefore sell more BANNERS and BANNER REORDERS! If you’re a dealer without this sample,
Call Us at (619) 644-2332 and request one.
Wholesale-Only Wide-format BANNER PRINTING priced as low as 70¢ per square foot!
We provide our banner printing service for those of our sign company dealers who may have had their printer go down temporarily, or cannot print this large as the job calls for.
Okay, we admit it – some banner companies make banners just as well as we do. Most do not…
But no one makes them for less!
Our quality is Top Notch! Full Photographic Color, printed with solvent fade-resistant ink on heavy-duty all-weather 13-ounce Banner Material with embedded reinforcing threading — THE BEST!
Yet our prices are only about 25% of what some national chain stores charge for Banners, and far less than what most other sign shops charge, so you’ll have a nice profit margin every time you resell to your customer!
Example: A 2 x 3 foot banner (6 square feet) @ $1.45 per square foot; your price is only $8.70. Add hemming and grommetting for only $0.50 per linear foot (10 feet for this banner, $5 your cost), and you have a fully-finished banner for only $13.70 total banner price! This banner sells elsewhere for around $50! If you need artwork, it’s only $29* (almost all cases).
To figure your price:
Figure the square footage (length x width in feet, rounded up to a full foot).
Example: a 4.5 foot x 7.25 foot banner is calculated at 5 x 8 = 40 square feet.
Check the table below to find the per-square-foot price for your banner:
1 to 99 square feet $1.45 per square foot
100 to 499 square feet $1.25 per square foot
500 to 999 square feet $1.00 per square foot
1000 square feet and up $0.70 per square foot
Add $0.50 per linear foot (height x 2 + width x 2) for full thermal hemming and brass grommetting.
The best way to contact us is by phone (619) 644.2332 – Ask for Julius
However, if you do need to email us you can use this contact form below.